Riello Light Oil Burners

Product Details:

The Riello Gulliver RGD series of two stage light oil burners, is a complete range of products developed to respond to any request for home heating. The Gulliver RGD series is available in five different models, with an output ranging from 14 to 296 kW, divided in four different structures. All the models use the same components designed by Riello for the Gulliver series. The high quality level guarantees safe working. In developing these burners, special attention was paid to reducing noise, to the ease of installation and adjustment, to obtaining the smallest size possible to fit into any sort of boiler available on the market. The two stage working guarantees high level of thermal unit efficiency. All the models are approved by the EN 267 European Standard and conform to European Directives for EMC, Low Voltage, Machinery and Boiler Efficiency. All the Gulliver RGD burners are fired before leaving the factory.

Request
Callback

Additional Information:

• Item Code: RG1RKD

Product Details:

The PRESS P/G series of burners covers a firing range from 415 to 5340 kW. Setting can be “two stage progressive” or, alternatively, “modulating” with the installation of a PID logic regulator and respective probes, which guarantees a turn down ratio of 3:1. The versatility of this range makes the burner well suited for use on commercial or industrial applications where the load factor is subject to wide variations over a short period of time. Simplified maintenance is achieved by Riello designed slide bar system, which allows easy access to all of the essential components of the combustion head.

Request
Callback

Additional Information:

• Item Code: P140P-G

Product Details:

Specifications

• Material Fiber, MS, SS, Aluminum, Copper
• Machine Color Red
• Motor Color Black, Silver
• Firing range 17 to 46 kW
• Control box type R.B.L. 531 SE
• Electrical supply (Ph/Hz/V) 1/50/230 +-10%
• Fan motor protection level (IP) 20

Note

• Above price is only for burner not included the price for any accessories. Terms & Condition is apply

Request
Callback

Additional Information:

• Item Code: RC2R

Product Details:

The PRESS G series of burners covers a firing range from 107 to 1660 kW and they have been designed for use in civil installations of average dimensions, like building areas and large apartment groups or for use in industrial applications, like small or medium plants. Operation is two stage; the combustion head, that can be set on the basis of required output, allows optimal performance ensuring good combustion and reducing fuel consumption. The main feature of these burners is their reliability due to a simple and strong construction, that permits operation without particular maintenance intervention. Simplified maintenance is achieved by the slide bar system, which allows easy access to all of the essential components of the combustion head. All electrical components are easily accessible only by dismounting a protection panel, thus guaranteeing a quick and simple intervention on components.

Request
Callback

Additional Information:

• Item Code: PRESS-GW

Product Details:

We are the leading supplier of Press GV Series One Stage Burners made available to our clients at competitive prices.

Request
Callback

Additional Information:

• Item Code: PRESS-G24

Product Details:

The Riello Gulliver RG one stage light oil burners series, is a complete range of products developed to respond to any request for home heating. The Gulliver RG series is available in ten different models, with an output ranging from 16,6 to 309,5 kW, divided in five different structures. All the models use the same components designed by Riello for the Gulliver series. The high quality level guarantees safe working. In developing these burners, special attention was paid to reducing noise, to the easiness of installation and adjustment, to obtaining the smallest size possible to fit into any sort of boiler available on the market. All the models are approved by the EN 267 European Standard and conform to European Directives for EMC, Low Voltage, Machinery and Boiler Efficiency. All the Gulliver RG burners are fired before leaving the factory.

Request
Callback

Additional Information:

• Item Code: RG0R

Product Details:

The Riello RDB series of one stage light oil and kerosene burners is available in 8 basic models, with an output ranging from 16,8 to 120 kW, in three different structures. The models are available in light oil and kerosene versions, conventional flue and balanced flue, with or without the fuel pre-heater fitted. A new model has been specifically designed to meet the increasing trends towards high pressure working field demand. These models are distinguished by their compact size. All the models use the same components designed by Riello for the RDB series. The high quality level guarantees safe working. In developing these burners, special attention was paid to reducing noise, to the ease of installation and adjustment, to obtaining the smallest size possible to fit into any sort of boiler available on the market. All the models are approved by the EN 267 European Standard and conform to European Directives for EMC, Low Voltage, Machinery and Boiler Efficiency. All the RDB burners are fired before leaving the factory.

Request
Callback

Additional Information:

• Item Code: RDB1

Product Details:

The Riello 40 G series of one stage light oil burners, is a complete range of products developed to respond to any request for home heating. The Riello 40 G series is available in eleven different models, with an output ranging from 12 to 240 kW, divided in four different structures. All the models use the same components designed by Riello for the Riello 40 G series. The high quality level guarantees safe working. In developing these burners, special attention was paid to reducing noise, to the ease of installation and adjustment, to obtaining the smallest size possible to fit into any sort of boiler available on the market. All the models are approved by the EN 267 European Standard and conform to European Directives for EMC, Low Voltage, Machinery and Boiler Efficiency. All the Riello 40 G burners are fired before leaving the factory.

Request
Callback

Additional Information:

• Item Code: G3

Product Details:

The RL series of burners covers a fi ring range from 154 to 2700 kW, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil boilers. All models are suitable for combustion of light oil and blend of light oil and biodiesel up to 5%. Operation is “two stage”; the burners are fitted with a microprocessor-based control panel, which supplies indication of burner status and fault causes. Optimisation of sound emissions is guaranteed by the special design of the air suction circuit. The elevated performance of the fans and combustion head, guarantee flexibility of use and excellent working at all firing rates. The exclusive design ensures reduced dimensions, simple use and maintenance. A wide range of accessories guarantees elevated working flexibility.

Request
Callback

Additional Information:

• Item Code: RL34MZ

Product Details:

The RL/M series of burners covers a firing range from 166 to 2431 kW, and they have been designed for use in hot or superheater water boilers, hot air or steam generators, diathermic oil boilers. Operation can be “two stage progressive” or, alternatively, “modulating” with the installation of a PID logic regulator and respective probes. RL/M series burners guarantee high efficiency levels in all the various applications, thus reducing fuel consumption and running costs. Optimisation of sound emissions is guaranteed by the use of fans with forwarding inclined blades and sound deadening material incorporated in the air suction circuit. The exclusive design ensures reduced dimensions, simple use and maintenance. A wide range of accessories guarantees elevated working flexibility.

Request
Callback

Additional Information:

• Item Code: RL28M

Product Details:

The PRESS T/G series of burners covers a firing range from 830 to 5340 kW. Available in 4 different models, these burners are particularly well suited for matching with pressurized chamber boilers. For their characteristics, they find application in big civil plants for domestic heating or in industrial applications where thermal load is repetitive and predictable. A hydraulic ram exclusive system, with 3 adjustable positions, regulates dampers opening, allowing air passage in relation to output required: in this way flame stability is optimized in every working point, with micro-regulation available. The burners are fitted with a microprocessor control panel which supplies indication of operation and diagnosis of fault cause.

Request
Callback

Additional Information:

• Item Code: P140T-G

Product Details:

RL/B MZ series burners are characterized by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier, faster and, above all, more flexible. The series covers a firing range from 1250 to 4450 kW, and they have been designed for use in hot water boilers, overheated water boilers as well as steam boilers. The operation is 2 stages. The innovative combustion head is able to reach good performances in term of Low NOx and helps in reducing noise emissions.

Monoblock forced draught gas burner with “two stage progressive” operation, fully automatic, made up of:

• Fan with reverse curve blades high performance with low sound emissions
• Air suction circuit lined with sound-proofing material
• Air damper for air setting controlled by a high precision servomotor
• Air pressure switch
• Low emission combustion head, that can be set on the basis of required output, fitted with: Stainless steel end cone, resistant to corrosion and high temperatures
• Ignition electrodes
• Flame stability disk
• Burner safety control box for controlling the system safety
• Star/triangle starter for the fan motor (only for RL 400/B MZ model)
• Main electrical supply terminal board
• Burner on/off switch
• Auxiliary voltage led signal
• Burner working led signal
• Contacts motor and thermal relay with release button
• Motor internal thermal protection
• Motor failure led signal
• Burner failure led signal and lighted release button
• Emergency button
• Coded connection plugs-sockets
• Burner opening hinge
• Lifting rings
• Gears pump for high pressure fuel supply
• Pump starting motor
• Oil safety valves
• Three oil valves (1st and 2nd stage 3rd safety valve)
• Photocell for flame detection
• Flame inspection window.

Standard Equipment:

• 1 flange gasket
• 4 screws for fixing the flange
• 1 thermal screen
• 4 screws for fixing the burner flange to the boiler
• 2 flexible pipes for connection to the oil supply network
• 2 nipples for connection to the pump with gaskets.
• Instruction handbook for installation, use and maintenance
• Spare parts catalog.

Request
Callback

Additional Information:

• Item Code: RL-B-MZ